Skip to main content
To speed up or slow down part of your video, drag across that stretch of the timeline, click Speed in the toolbar above the timeline and pick a rate from 0.25× to 10×. Only that part, called a speed section, plays at the new rate, and the video gets shorter or longer to match. Use it for long demos, loading screens or anything slow.

Add a speed section to a selection

  1. Open your video in the editor.
  2. Drag across the part of the timeline you want to change. The selection can run across more than one clip.
  3. Click Speed (gauge icon) in the toolbar above the timeline (tooltip Add a speed section). The menu is headed Add speed to selection.
  4. Pick a rate.
The section shows on the timeline as an amber band over the clip, with its rate (for example 2×) on a label at its top-left. Speed is in the timeline toolbar of the Cut, Layout, Effect, Overlay and Audio tools.

Add a speed section at the playhead

With nothing selected on the timeline, the Speed menu reads Add speed section. Pick a rate and Tella adds a section of up to 5 seconds that starts at the playhead. If the playhead is already inside a speed section, the new one starts where that section ends. You can also click Effect in the left toolbar, then + (Add speed section) next to Speed (“Speed up or slow down part of the clip.”). This adds a 1.5× section at the playhead, or over your timeline selection if you have one.

Which speeds can I pick?

The speed menus offer 0.25×, 0.5×, 0.75×, 1.25×, 1.5×, 2×, 3×, 5× and 10×. Rates below 1× slow the video down; rates above 1× speed it up.

Change the speed of a section

  • Click the rate label on the band (or right-click the band) and pick another rate.
  • Or click the band to select it, then click the rate button in the timeline toolbar (it shows the current rate, tooltip Change speed) and pick another rate.
To re-time only part of an existing section, select that part of the timeline and add speed to it. The rest of the original section keeps its rate.

Move or resize a speed section

Click a band to select it, then:
  • Drag either end of the band to make the section shorter or longer.
  • Drag the middle of the band to move it.
A section can’t overlap another one, and it is always at least 1 second long.

Remove a speed section

  • Click the rate label on the band (or right-click the band) and choose Remove speed.
  • Or click the band to select it and press Delete or Backspace, or click Delete in the timeline toolbar (tooltip Delete speed section).
Removing a section makes that part play at normal speed again. You can undo it.

Why can’t I add a speed section here?

Tella shows a warning instead of adding the section when:
  • Selection too short for a speed section: the selection is shorter than 1 second.
  • Not enough room for a speed section: with nothing selected, there’s less than 1 second between the playhead and the next speed section or the end of the clip.
  • Speed sections can’t overlap: two of your selected ranges overlap each other.

Why is a speed greyed out?

The speed changes smoothly at each end of a section rather than jumping, and that change takes time. A short section may not have room for it at a very different rate, so that rate is greyed out in the menu. Hover it to see how long the section needs to be, for example “Needs to be at least 1.2 s for this speed”. Make the section longer, or pick a rate closer to the speed around it.

What does a speed section change?

Everything in that stretch of the video plays at the section’s rate: the screen recording, camera, zooms, layout changes and the cursor.
  • Voice: speeds up or slows down with the video and keeps its pitch, so it doesn’t sound higher or lower.
  • Background music: keeps playing at normal speed.
  • Subtitles: stay in sync with the sped-up or slowed-down video.
  • Chapters: keep the times they were saved with, so a chapter after a speed section can start at the wrong moment. After changing speed, click your video’s title, choose Chapters and click Regenerate chapters (the sparkles button), review the new chapters and click Done to save them. They’re timed to the sped-up or slowed-down video; until you click Done, viewers still see the old times. The Your edits may have changed your chapters. banner doesn’t appear for speed changes, so do this yourself. You can also edit a chapter’s time by hand, but times can’t go past the video’s length without speed changes, so after slowing part of the video down, a chapter near the end may not reach the right spot. See Regenerate chapters.
  • Length: the video gets shorter (or longer). The total duration on the playbar includes your speed sections, except while you use the Cut tool, which shows the length of the timeline itself.
  • Sharing and downloads: viewers and downloaded MP4s get the same speed changes you see in the editor.

How is this different from other speed settings?

A speed section changes the video itself, for one part of it. Tella has three other speed settings that apply to the whole video:
  • Editor playback speed (the 1.0x button on the playbar) only changes how fast the preview plays for you while you edit. See Editor playback speed.
  • Export speed speeds up or slows down the whole MP4 you download. See Change export speed.
  • Viewer playback speed sets the speed the shared video starts at for viewers, who can still change it in the player. See Adjust viewer playback speed.
To change how fast a video overlay plays, select it with the Overlay tool and click its rate in the timeline toolbar (tooltip Overlay speed). That changes only the overlay, not the video behind it.
Last modified on November 19, 2026