Projector quote

Show one short quote like a slide from an old projector: a near-black frame with the words in bold condensed type (Oswald) on the left, slightly soft and glowing as if thrown on a wall, the speaker's name small underneath, and on the right a small 4:3 window of footage playing as old film, with grain, flicker, scratches, dust, a warm light leak and a hair in the gate. The picture is there from the first frame, the quote fades in after it and out before the end, and the whole slide trembles and slips like a worn print. A live, editable Tella Motion document, used as b-roll or as a clip of its own. Use when asked for a projector quote, an old film quote, a Super 8 or home-movie quote card, a vintage or archive-footage quote, a founder's or historical quote beside film, a quote slide with a film look, or a nostalgic quote moment. For a press quote set over full-frame footage like a trailer, use dramatic-quote.

Use it in Tella

  1. Open any video in Tella, then open the AI chat.
  2. Paste the skill:
    tellahq/community-skills/projector-quote
  3. Then ask for what you want, for example:

    Show "We just kept fixing the next thing" from our founder Ana Ruiz as an old projector slide, beside grainy film of a workshop.

Use it in Claude Code

Add it to Claude Code, or any agent that reads skills:

npx skills add tellahq/community-skills --skill projector-quote

Instructions

What the AI chat follows when the skill is pasted, from its SKILL.md.

Projector quote

One line from a person, about eight seconds, shown like a slide from an old projector. The frame is near black. A short quote sits on the left in bold condensed type with the name under it; on the right a small 4:3 window of footage plays as old film. Nothing slides or bounces: the picture is simply there, the words fade up beside it, and the slide trembles as a worn print does. It suits a line from someone the footage is about (a founder, an explorer, a customer on camera) and works as an opener, a chapter break or a closing thought.

One Tella Motion document: every word stays editable and the film look is live effects on ordinary footage, not a baked video. Builds on tella-motion-design. For a press quote over full-frame footage, use dramatic-quote.

Ask once

Work out yourself, never ask: the quote and the name when the message gives them or the speaker reads the line (get_timeline with words); the canvas size; whether it is b-roll over a stretch of the video or a clip of its own (b-roll when the speaker says the line, a clip when the video is empty or the user asks for an opener or an ending).

Then one ask_form, every field prefilled so the user can just submit:

  1. Quote (required): the words without quote marks, at most about 60 characters. Shorten only by cutting words, never by rewording, and only with the user's OK.
  2. Name (required): who said it, up to about 30 characters. A role can follow after a comma ("Ana Ruiz, founder").
  3. Footage (pick): A moment of this video, From my library, Old film from Tella's vintage catalogue, Generate new footage.
  4. What the footage shows (one line): used to search the vintage catalogue or to generate.
  5. Length (slider, 6–12 s, default 8).

Never invent a quote or put words in a real person's mouth. With nothing real to show, use a clearly fictional line and name and say so in the report.

Footage

Anything slow with one clear subject: a landscape, a building, hands at work, a street. The window is small, so wide shots with fine detail turn to mush and a single shape reads best. It needs to last the whole length.

  • Vintage catalogue: list_library scope vintage with a query. Items are real old film, mostly 4:3, which is what the window wants. An item has a url, not a sourceId: download it, create_source kind video, upload it to the uploadUrl, and use that source.
  • Library or attachment: its sourceId.
  • Generated: generate_video with the subject plus slow, static or gently drifting camera, natural light, no people looking at the camera, no text. Don't ask the generator for a film look: the treatment below adds it, and doing it twice turns to noise.
  • Colour footage is right; the treatment cools and fades it. Black-and-white works too.

The look (1920 × 1080; scale every size and position by the canvas width / 1920)

Nodes in paint order: ground, then a slide group holding the film group (halo, footage, gate, hair) and the quote group.

  • ground: a full-frame fill, #050505.
  • Film window: 640 × 480, centred on the right half at (1440, 540), so its top-left is (1120, 300).
  • gate: the window's shape, a rounded rectangle (radius 22) whose edge is slightly uneven, as a film gate's is. Filled white, blurred 1.6 px, and used as the footage's alpha matte, which hides it. Get the path from scripts/film_gate.py.
  • halo: the same path filled #9DB2C6 at opacity 0.15 with a 42 px blur, under the footage. It is the projector's light spilling past the frame.
  • footage: the media node, which fills the canvas when added. Scale 0.4577 (about the canvas centre, the default) so its height just covers the window, and x 480 to centre it in the window. Slide x either way to frame the subject, as far as the footage still covers the window (x 368 in the example).
  • hair: a 2 px round-capped curved stroke in the ground colour rising about 60 px from the window's bottom edge, blurred 0.8 px: a hair caught in the gate. Also from the script.
  • Quote: one text node on the left half. Box x 114, width 720, height 1080, centred vertically, left-aligned. Oswald 700 at 84 px, line height 1.16, #F4F4F2. Curly quote marks in the text, with hanging punctuation and a 100 px start indent, so the opening mark hangs to the left of the lines. 2–4 lines; for a longer quote drop to 72 px before letting it reach five.
  • Name: a second run in the same node after a line break, Oswald 500 at 34 px, letter-spacing 0.68, line height 1.15, 34 px of space before it. Because it is the same paragraph, it follows the quote when the words change. No role line, stars, logo or portrait.
  • The quote group is isolated, rotated −0.8° about (480, 540), and carries, in order: fx.chromaticAberration amount 2.5, a 1.1 px blur, and glow (radius 18, threshold 0.4, intensity 0.6, softness 0.3, screen). The type should look projected, not printed.

Film treatment

On the footage, in this order (the order matters, each step works on the one before):

  1. saturation 0.85, contrast 0.96, brightness 1.12 (the node's own properties);
  2. a 2.6 px blur;
  3. a cool colorMatrix: [0.9, 0.04, 0.02, 0, 0, 0.02, 0.95, 0.03, 0, 0, 0.03, 0.06, 1.04, 0, 0.02, 0, 0, 0, 1, 0];
  4. fx.levels gamma 1.18, outputBlack 0.03, outputWhite 0.98 (lifted blacks, dimmed whites);
  5. fx.addGrain intensity 0.13, size 2, monochrome;
  6. the gate matte;
  7. the shader in references/old-film.sksl, with t keyed linearly from 0 to the length in seconds and cx set as its header says (960 for footage centred in the window, 1205 for x 368).

The shader is most of the look: a projector hot spot with dark corners, exposure flicker, a warm light leak that drifts in from the left now and then, scratches and dust, all stepping 18 times a second. Use it as written.

Motion

  • Gate weave on the footage, as wiggles: x by 1.3 px at 7 Hz, y by 1.8 px at 9 Hz, brightness by 0.045 at 12 Hz. Brightness is a multiplier, so 0.045 is 4.5 %; an amount of 4.5 blows the picture out.
  • The slide (window and quote together): wiggle x 0.9 px at 11 Hz, y 2 px at 13 Hz, rotation 0.1° at 6 Hz. Give each wiggle its own seed.
  • Two frame slips on the slide's y with hold keys: 0 at 0 s, +13 at 2.4 s, 0 at 2.467 s, −9 at 5.3 s, 0 at 5.333 s. For another length, put them at about 30 % and 66 % of it.
  • The quote fades 0 → 1 from 0.5 s to 1.4 s and 1 → 0 from L − 1.4 s to L − 0.6 s (easeInOutSine). The window is there from the first frame to the last, so the picture leads and the words follow.
  • With speech: start the document so the fade-in begins about 0.3 s before the speaker starts the line, and keep the quote fully up until they finish it.
  • No motion blur, no intro or outro on the b-roll: it hard-cuts in and out.

Building it

  1. The document. B-roll: create_motion_document with the videoId. A clip of its own: create_motion_document without one (canvas the size of the video, or 1920 × 1080), shown later with create_clip (type: 'motion', documentId). Everything below is apply_motion_editor_commands on it.
  2. Batch 1: canvas.set {duration: {seconds: L}}; addShape ground (fill, #050505); addPath halo; addMedia footage (sourceId, start 0, duration L); addPath gate (white, fill); addPath hair (stroke, width 2, round cap). Every node starts at 0 and lasts L. Paths: python3 film_gate.py ($HOME/.agents/skills/projector-quote/scripts/, fallback /workspace/skills/projector-quote/scripts/) prints {"gate", "hair"} for the default window; pass x y width height for another.
  3. Batch 2, the film: halo opacity and blur; gate and hair blurs; on the footage setProperty scale, x, saturation, contrast, brightness; then addEffect blur, colorMatrix, fx.levels, fx.addGrain; then setMatte (matte: 'gate', mode: 'alpha'); then addEffect kind shader with the file as source and uniforms: {t: [0], cx: [960]}; the three setExpression wiggles; group the four nodes as film.
  4. Batch 3, the words: addTitle the quote (font: 'oswald', weight 700, size 84, box {x: 114, y: 0, width: 720}, left). Then node.patch its content into a richParagraph: height: 1080, verticalAlign: 'center', paragraphFormat: {hangingPunctuation: true, startIndent: 100}, the same defaultStyle, and two runs: the quote ending in \n, and the name with style: {fontId: 'font.freeform.oswald.500', fontSize: 34, fontWeight: 500, letterSpacing: {type: 'value', value: 0.68}, lineHeight: 1.15} and paragraph: {format: {spaceBefore: 34}}.
  5. Batch 4, the slide: group the text as quote; node.patch {common: {isolate: true}}; anchor (480, 540), rotation −0.8; its three effects; setKeyframes on opacity. group film and quote as slide; setKeyframes on its y with easing: 'hold'; its three wiggles.
  6. Key the shader's clock: inspect_motion_node_properties on footage, find the property ending uniforms/t/values/0, and setKeyframes it [{at: 0, value: 0}, {at: L, value: L}] with easing: 'linear'.
  7. Place it: b-roll with add_layout over the time range (media: {type: 'motion', documentId}, no layout), or create_clip.

Gotchas (all hit while building this)

  • A font weight exists in the document only once a title has used it. Patching a run to font.freeform.oswald.500 fails with asset.missing_or_wrong_kind unless an addTitle in Oswald 500 came first: add a throwaway one-letter title at weight 500 in the same batch, before the patch, and delete it after. The weight stays registered.
  • setMatte takes a place in the footage's effect stack, where it is called. Call it after the grain and before the shader, the order of the treatment list.
  • setKeyframes keys are {at, value} in seconds, not {time, value}.
  • The shader's uniforms appear as properties named by their position in the stack (field:common/effects/8/effect/uniforms/t/values/0), so look the name up instead of typing it.
  • Leave t unkeyed and the film freezes: no flicker, one fixed set of scratches.
  • Don't paste a noise or hash function into the shader. Tella adds its own, and fract(sin(...)) hashes draw lines across the grain on export.
  • delete takes one node, not a list.
  • Footage narrower than 16:9 only covers the window near x 480. Slide it further and one side of the window goes empty.
  • create_clip names a new video after the document: rename it with update_video.

Check

  • get_motion_frame at 1920 wide in the middle of the hold. The quote reads at a glance, its opening mark hangs outside the left edge of the lines, and the name is clear of the last line. The window's edge is soft and slightly uneven with a faint halo around it; the grain is visible but the subject still reads; nothing in the window is clipped to a straight edge.
  • get_filmstrip of the document over the whole length. The window is there in the first and last tiles, the quote is absent from both, the leak comes and goes, and the brightness is steady from tile to tile (a white-out means the brightness wiggle is too large).
  • Report the quote, the name, where the footage came from, the time range, and anything fictional.

Variations

  • Mirrored: window on the left at (480, 540) with the footage at x −480, quote box at x 1074, rotation +0.8° about (1440, 540). The light leak still comes from the window's left.
  • Black-and-white: saturation 0 in place of 0.85, and drop the cool colour matrix.
  • No name: an anonymous line, or a title rather than a quote. Leave out the second run and the quote marks.
  • Several quotes in a row: one document each, on different footage, hard cut between them.

Files

The other files in the skill, such as reference videos it copies from.

Made byTella
CategoryTitles & text
UsageNewNo uses yet
First publishedNov 16, 2026
Last updatedNov 16, 2026

Record better videos, faster

Get started